SLT 1200 Product Description
Lights:
- Illumination: Up to 90,000 lumens
- IP Rating: IP68
- Body: Aluminum
Batteries:
- AGM Sealed “non-spillable”
- Voltage: 6V each
- Quantity: 16
- Bank Voltage: 24VDC
- Amp Hours: 1040 amp hrs
Solar Panels:
- Qty: 4 Poly-crystalline Panels
- 10 year Warranty by Manufacturer
Light Fixture Upgrades:
- 4 LED w/ output 13.2k lm
- 5 LED w/ output 16.5k lm
- 6 LED w/output 19.8k lm
Solar Systems
- Two (2) totally independent off-grid solar systems housed on a single customized towable trailer; each off-grid system is complete with a monocrystalline solar array, MPPT charge controller, LED floodlights, an automated light timer with manual on/off function and is connected to a deep cycle bank of batteries with a state-of-charge monitoring meter.
Power Generation -1200W of Solar Power
- Monocrystalline solar arrays (5″ cells, highest power / sq ft available)
- Automated steel actuators to raise and lower solar wings
Automated Light Timer / Charge Control Module
- Light Timer(s) to enable automated, timed interval or manual lighting start/stop times (works independent from solar panels)
- Maximum Power Point Tracking (MPPT) charge controller(s) to maximize solar power gained and to prevent over or under charging of batteries. Performance data from the charge controllers can be downloaded.
- Temperature controlled cooling fans provided where needed
- Hour meter(s)
Power Storage
- 24 Volt DC deep-cycle, battery bank(s) comprised of flooded or AGM (sealed, no maintenance) batteries; 840 – 900 Ah combined capacity of battery banks.
- AC dual battery bank charger – 40Ah dual battery bank rapid-charger for backup using generator or any other standard 110V/20amp, 50/60Hz (available 240V) commercial electrical source. Lights can be operated while batteries are being charged.
- Battery State-Of-Charge Meter – Visual display in increments of available battery capacity
Trailer & Housing
- Durable, steel vented housing customized to store, protect and maximize functionality of power generation, power storage and light tower components
- Wheelbase 55″ (same for all SLT models)
- Towing weight – 2,980 to 3,495lbs (varies based on model, options & battery package)
- Dimensions – 4.42 meters (174 inches) long x 1.37 meters (54 inches) wide x 2.13 meters (84 inches) high (same for all SLT models)
- Towing specifications & requirements – 2″ ball size, tongue weight – est. 128 lbs.
- Forklift pockets on mast for high point access and on trailer base for low point access. Crane hook pocket on mast for high point access.
- Straight tongue – standard 2″ coupler connection
- 4 per unit “D” rings used to secure unit during transportation
General Data
- 3-stage light tower that can expand from ~ 12′ to 30′
- 4 per unit LED Flood Lights (~36,400 initial LED lumens) estimated life up to ~5-10x longer than standard metal halide bulbs; LEDs expected 50,000+hrs
- The SLT 1200 uses two (2) solar arrays of 600 watts (combined 1200 watts) each instead of the 400 watt solar arrays (combined 800 watts) of the SLT800 series
- Two (2) higher capacity MPPT controller(s) that can handle the increased voltage and current
*Specifications may slightly vary based off of which units are available for lease or sale.
*Don’t like what you see? Let us know what specifications are a must for your solar light towers.